Android Tablet, Thin Client & Mini PC, OEM/ODM
Vigekwear - Micro, Modularized, Open source
Vigekwear is a micro, modularized, open source, wearable BLE device for DIYers. It makes any BLE(Bluetooth Low Energy) projects easier.
Model# : Vigekwear
Release Time : Dec. 2014
Accept OEM/ODM
Features :
Pedometer and Motion tracker
Temperature and Humidity detection
Bluetooth intelligent anti-lost locator
Pressure & Altitudedetection
Gesture recognition

If you feel interested in this product but miss our kickstarter funding, pls contact us directly at


Overview - What’s the Vigekwear


Vigekwear is a BLE product based on a Nordic BLE chipset. It’s different from other wrist straps available in the market, such as gearfit and jawbone.


Vigekwear is designed specifically for DIYers. just like building blocks for kids, Vigekwear components allow you to build it into whatever you like, be it a bracelet or otherwise!


Vigekwear is fully open source. The aim of Vigekwear is to speed up your development cycle. Choose Vigekwear to be the development kit for your BLE project!


vigekwear - giayee

vigekwear - giayee

Making a wrist strap


We have made a FPC and a rubber ring as shown below. If you are neither a programmer nor an electronic engineer, you can also make a wrist strap by yourself, just assembling Vigekwear modules with FPC and putting them into a rubber ring.


vigekwear - giayee


Vigekwear features


· It’s modular in design!


We have designed many micro-sized modules, including BLE MCU module, battery charger module, acceleration sensor module, baroceptor module, temperature sensor module, gyroscope module, OLED display module, heart rate sensing module,etc.


Each of module performs one or two functions,which then can be assembled together to create a variety of cool products. The possibilities are endless!


·It has a 24-pin uniform interface!


definition of 24-pin connector
definition of 24-pin connector


All the modules have an uniform 24-pin interface as shown below. Vigekwear’s interface board has six 24-pin sockets, connected in parallel, for your different modules. you can then place the modules in any of the six positions in the direction of the arrows! If you think the base board is too long, you can cut it shorter. Otherwise, if you think one base board is not enough, we will provide free a connector board which acts as a bridge to connect two base board to backers who fund two or more vigekwears.


In addition,the 24-pin module contains 1*SPI, 1*UART, 1*I2C, 1*SWD, 6*ADC/GPIO + 2*GPIO, so it is flexible to extend more modules. For conenvience, we call the board with six 24-pin sockets “base board”.


·It’s completely customizable!


Of the six sockets, two of them will default to be a power supply module and a BLE MCU module, as they are essential to any BLE projects.

The remaining four sockets can be used to add any other functions. The only thing need to do is to design a new module with Vigekwear’s uniform interface. We currently have a bunch of other designs available, such as GPS module, wireless charger module, bar code reader module, NFC module, etc.


If you have a good idea, feel free to contact and share with us!


·It’s tiny!


vigekwear - giayee


Battery : 20mm*10mm*3.0mm with 40mAh.

MCU board: 10mm*21mm.

Other boards: 10mm*10mm.


· It’s totally Open source!


Vigekwear aims to create an easy-to-use, micro-sized, expandable development kit for anyone who want to start a BLE(Bluetooth Low Energy) project.


We will provide samples for backers, and will open all our source code to them.


vigekwear - giayee

We will also provide the demo android app and API of Vigekwear. This app allows for exchanging of data with BLE devices through a Bluetooth connection, whereas the typical BLE project will need you to develop the BLE firmware and phone app yourself.BLE device firmware is usually written in C language and assemble language, while the phone apps are almost written in java, Hence, you will derive a lot of benefit from the source code which we have released.


vigekwear - giayee

We've benefitted from the open source communityand Vigekwear is our way of giving back!


Vigekwear is a completely open source hardware product!

vigekwear - giayee

All our hardware design files (schematic, board design) will be sent to backers by email. 


Spec of Vigekwear


· USB battery charge control module.

Vigekwear-CHG size:10x13mm

The USB connector is Micro USB type and only support charge function. It can be connected to PC USB port or generic USB charger. There are two LEDs on this board, one is green, another is red. When connected to charger, the green LED will turn on and if the charge module detects battery the red LED will turn on to indicate charging. The red LED will turn off when charging finished.


·3-axis digital accelerometer and barometric pressure sensor.

Vigekwear-BAC 10x10mm

The two sensors are connected on the same I2C bus with different device address. We can get acceleration, barometric pressure, temperature and altitude from the sensors.


·Versatile 9DoF sensor module.

Vigekwear-MAG Size: 10x10mm

This board contains a 3-axis gyro & 3-axis accelerometer (BMI055) and a 3-axis magnetometer (AK8963). They are all using a single I2C bus and some interrupt signals. With this highly integrated sensor module, you can design a motion track application.


·BLE MCU board.

Vigekwear-MCU Size: 10*21mm

This board is the control center of other modules. It mainly contains a BLE MCU (nRF51822), a button and two LEDs. The button is designed to switch working mode and two LEDs indicate working status. They can be defined by users.


·OLED display module.

Vigekwear-OLED Size: 14x14mm

This module contain a low power OLED module with 64x32 resolution. MCU communicates with it through I2C interface. You can use it to display some text or graph.


·Battery module.

Vigekwear-BAT Size: 10x20mm

This module provides power supply for the whole system and provides a battery level detect signal to MCU. The module is consisted of a board and a battery pack. The capacity of one battery pack is 40mAh. The board with a socket can be connected to the header on the base board. You can place more than one battery module on the base board if you want a longer power endurance.


·Debug port module.

Vigekwear-DBG Size:10X12mm

This module simply connect the SWD port and UART port from the 24-pin socket to 2.54mm pitch header. You can easily connect Vigekwear with JLink and serial port to debug the program.


·Base board

Vigekwear-BASE Size: 10X70mm

This base board contain six 24-pin headers. The headers are parallelly interconnected with each other. The header insert to the socket of the module. The arrows on the base board and modules to indicate the correct connection orientation. While you don’t need to worry if connect to wrong direction will damage the modules, we have considered it. Wrong connection will not damage the modules but the module will not work.


The design of Vigekwear rubber mould
The design of Vigekwear rubber mould


The T1 prototype
The T1 prototype



What can we do with the vigekwear


1. Pedometer and Motion tracker

vigekwear - giayee

Using acceleration sensor, combined with our pedometer algorithm, can easily realize step counting function, connect with your mobile phone via Bluetooth, check your movement data any time, share them with your friend via APP.


2. Temperature and Humidity detection

vigekwear - giayee

By using a Temperature & Humidity sensor, you can easily get the real-time information and display on OLED screen, you can also synchronize the data onto mobile APP via Bluetooth


3. Bluetooth intelligent anti-lost locator

Through the distance changes to determine whether the items are controlled in your safe range, can be applied to the anti lost of mobile phone, anti lost wallet, keys, luggage and other valuables, also can be used to prevent children or pets lost.


4. Pressure & Altitudedetection

You can measure the atmospheric pressure through the pressure sensor, calculate altitude value via pressure and temperature, provides a great convenience for travel or outdoor sports.


5. E-Compass

With a high sensitivity magnetic field sensor and related algorithm, you can development the e-compass application easily.


6. Gesture recognition

Gyroscope technology is becoming a new and high-profile somatosensory control technology, which can provide accurate inertial, reaction force, position, velocity and acceleration signal, using these data and accurate motion detection algorithm, bring new motion and gaming experience.


7. HID Input

Human interface device (HID) application mode in Bluetooth Technology can make you easily connect and control their computer, joystick, remote monitoring equipment etc..


8. Bluetooth Smart Beacon

Vigekwear can be used as a Beacon Kit. The Beacon application lets you explore the full range of possibilities for beacons using Bluetooth Smart technology. The application allows you register actions that will be triggered when specified event occur. Currently a beacon may silent the phone, open an application, open a website in a browser, show predefined information about an objector play an alarm on one of the 4 events: beacon region has been entered or exited, a beacon is near or very close. ……


Use your imagination, you can do more than you can expected!


Website record number:粤ICP备16017643号-1